DYNATRON/BONDO CORPORATION -- 906 MUFFLER & TAILPIPE SEALER  -- 8030-00F020122
<pre>=====================  Product Identification  =====================

Product ID:906 MUFFLER & TAILPIPE SEALER
MSDS Date:06/25/1988
FSC:8030
NIIN:00F020122
=== Responsible Party ===
Company Name:DYNATRON/BONDO CORPORATION
Address:3700 ATLANTA INDUSTRIAL PARKWAY N W
City:ATLANTA
State:GA
ZIP:30331-1098
Info Phone Num:(404) 696-2730 OR (800) 241-3386
Emergency Phone Num:(404) 696-2730 OR 671-1502
Preparer's Name:S ABDUL RAZZAK
CAGE:16522
=== Contractor Identification ===
Company Name:BONDO/MAR-HYDE CORP
Address:3700 ATLANTA INDUSTRIAL PKWY NW
Box:City:ATLANTA
State:GA
ZIP:30331
Country:US
Phone:404-696-2730
CAGE:16522

=============  Composition/Information on Ingredients  =============

Ingred Name:VINYL ACETATE HOMOPOLYMER
Fraction by Wt: <35%

Ingred Name:DIETHYLENE GLYCOL METHYL ETHER, 2-(2-METHOXYETHOXY) ETHANOL
CAS:111-77-3
RTECS #:KL6125000
Fraction by Wt: <5%

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN: IRRITATION OR RASH. EYES:
    IRRITATION OR REDNESS. INGESTION: SLIGHTLY TOXIC. INHALATION:
    NAUSEA & NARCOSIS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: IRRITATION OR RASH. EYES: IRRITATION OR
    REDNESS. INGESTION: SLIGHTLY TOXIC. INHALATION: NAUSEA & NARCOSIS.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/PLENTY OF WATER. SKIN: WASH THOROUGHLY W/SOAP &
    WATER. INHALATION: REMOVE TO FRESH AIR. INGESTION: INDUCE VOMITING.
    OBTAIN MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:188F
Lower Limits:1.7%
Upper Limits:22%
Extinguishing Media:CO2, DRY CHEMICAL OR WATER.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB W/INERT ABSORBENT. DON'T WASH INTO
    PUBLIC WATER SOURCE. WASH CONTAMINATED AREA W/WATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AT ROOM TEMPERATURE TO PROLONG
    LIFE. KEEP FROM FREEZING SO PRODUCT DOES NOT COAGULATE. USE
    W/ADEQUATE VENTILATION.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Ventilation:GOOD NATURAL DRAFT. EXHAUST BLOWERS TO RID FUMES.
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES W/SIDESHIELDS
Work Hygienic Practices:WASH HANDS W/SOAP & WATER AFTER EVERY USAGE.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>212F
Spec Gravity:1.54
Solubility in Water:SLIGHT
Appearance and Odor:BLACK PASTE W/VINEGAR ODOR.
Percent Volatiles by Volume:<40/WT

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:FREEZING
Hazardous Decomposition Products:UNDER SEVERE THERMAL DEGRADATION, LOW
    MOLECULAR WEIGHT HYDROCARBONS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.