BONDO/MAR-HYDE CORP -- 910 EPOXSTEEL PART A  -- -
<pre>=====================  Product Identification  =====================

Product ID:910 EPOXSTEEL PART A
MSDS Date:03/24/1998
FSC:NIIN:Submitter:F BT
Status Code:A
=== Responsible Party ===
Company Name:BONDO/MAR-HYDE CORP
Address:3700 ATLANTA INDUSTRIAL PKWY NW
City:ATLANTA
State:GA
ZIP:30331
Country:US
Info Phone Num:404-696-2730
Emergency Phone Num:404-696-2730
CAGE:16522
=== Contractor Identification ===
Company Name:BONDO/MAR-HYDE CORP
Address:3700 ATLANTA INDUSTRIAL PKWY NW
Box:City:ATLANTA
State:GA
ZIP:30331
Country:US
Phone:404-696-2730
CAGE:16522

=============  Composition/Information on Ingredients  =============

Ingred Name:EPOXY &HYDROCARBON RESINS
CAS:25085-99-8
&lt; Wt:50.

Ingred Name:FURFURYL ALCOHOL
CAS:98-00-0
RTECS #:LU9100000
&lt; Wt:5.
OSHA PEL:200 MG/M3;50 PPM
ACGIH TLV:40 MG/M3;10 PPM
ACGIH STEL:60 MG/M3;15 PPM

Ingred Name:INERT POWDERS, SUCH AS LIMESTONE
CAS:1317-65-3
RTECS #:EV9580000
OSHA PEL:15 MG/M3
ACGIH TLV:5 MG/M3

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: IRRITATION, SENSITIZATION,
    DERMATITIS. CHRONIC: NONE KNOWN
Medical Cond Aggravated by Exposure:PREEXISTING SKIN CONDITIONS

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH W/ WATER FOR 15 MINS. SKIN: WASH WITH MILD SOAP
    AND WATER.REMOVE CONTAMINATED CLOTHING AND WASH BEFORE REUSE.
    INHALATION: REMOVE TO FRESH AIR. APPLY CPR IF NECESSARY.
    INGESTION:IF CONSCIOUS , GIVE LARGE QUANTITIES OF WATER. INDUCE
    VOMITING. CALL A PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:=254.4C, 490.F
Extinguishing Media:DRY CHEMICAL, FOAM, CARBON DIOXIDE, WATER SPRAY
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS &
    PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS MAY
    BE TOXIC

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE WITH INERT ABSORBANT. PLACE MATERIAL IN
    CLOSABLE CONTAINER FOR DISPOSAL. FLUSH CONTAMINATED AREA WITH WATER

======================	Handling and Storage  ======================

Handling and Storage Precautions:CAUSES IRRITATION. MAY CAUSE ALLERGIC
    SKIN REACTION. AVOID CONTACT WITH EYE, SKIN OR CLOTHING. STORE IN
    COOL, DRY AREA. KEEP PRODUCT CAPPED WHEN NOT IN USE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE NORMALLY NEEDED. ACOID BREATHING OF VAPOR.
    USE ADEQUATE VENTILATION
Protective Gloves:NATURAL RUBBER
Eye Protection:SAFETY GLASSES OR GOGGLES
Other Protective Equipment:WEAR APPROPRIATE EQUIPMENT TO PREVENT EYE OF
    SKIN CONTACT. USE OF BARRIER CREAM RECOMMENDED.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:>200.C, 392.F
Vapor Pres:1
Spec Gravity:1.69-1.99
Solubility in Water:INSOLUBLE
Appearance and Odor:HEAVY GREY PAST/ SLIGHT ODOR
Percent Volatiles by Volume:<5

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
    ALDEHYDES
Conditions to Avoid Polymerization:ELEVATED TEMPERATURES, STRONG ACIDS
    OR BASES IN BULK

===================  Toxicological Information	===================

Toxicological Information:FOR BISPHNOL A DIGLYCIDAL ETHER RESIN: ORAL
    LD50 (RATS): > 10,000 MG/KG. DERMAL LD50 (RABBITS): > 6000 MG/KG.
    EYE IRRITATION (RABBITS) SLIGHT IRRITATION. SKIN IRRITATION
    (RABBITS): MODERATE IRRITATION . SENSITIZATION: MODERATE
    SENSITIZER.

=====================  Ecological Information  =====================

Ecological:ECOLOGICAL EFFECTS HAVE NOT BEEN DETERMINED AT THIS TIME.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
    FEDERAL REGULATIONS.

===================  MSDS Transport Information  ===================

Transport Information:DOT EXEMPTION: HAZARDOUS MATERIALS LABELING IS
    NOT REQUIRED EXCEPT FOR AIR TRANSPORTATION. CASE WEIGHT MAY NOT
    EXCEED 30 KG. (66 LBS) GROSS WEIGHT. CONSUMER COMMODITY, ORM-D. AIR
    FREIGHT & OCEAN SHIPM ENTS REQUIRE ADDITIONAL MARKING & LABELING.
    PLEASE CONTACT BAUSCH & LOMB DISTRIBUTION DEPARTMENT AT
    846/281-2017.

=====================  Regulatory Information  =====================

Federal Regulatory Information:TSCA: ALL INGREDIENTS IN THIS PRODUCT
    ARE LISTED ON THE TSCA INVENTORY.
State Regulatory Information:

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.