DYNATRON/BONDO CORP -- 404 FIBERGLASS RESIN  -- 8030-00F041814
<pre>=====================  Product Identification  =====================

Product ID:404 FIBERGLASS RESIN
MSDS Date:02/10/1993
FSC:8030
NIIN:00F041814
Kit Part:Y
=== Responsible Party ===
Company Name:DYNATRON/BONDO CORP
Address:3700 ATLANTA INDUSTRIAL PKY NW
City:ATLANTA
State:GA
ZIP:30331-1098
Country:US
Info Phone Num:800-241-3386/404-696-2730
Emergency Phone Num:404-696-2730/800-241-3386
CAGE:16522
=== Contractor Identification ===
Company Name:BONDO/MAR-HYDE CORP
Address:3700 ATLANTA INDUSTRIAL PKWY NW
Box:City:ATLANTA
State:GA
ZIP:30331
Country:US
Phone:404-696-2730
CAGE:16522

=============  Composition/Information on Ingredients  =============

Ingred Name:PROPYLENE GLYCOL, PHTHALIC ANHYDRIDE, MALEIC ANHYDRIDE
    RESIN		    *96-4*
CAS:25037-66-5
Fraction by Wt: <65%

Ingred Name:STYRENE, STYRENE MONOMER  (SUSPECTED ANIMAL/HUMAN
    CARCINOGEN BY IARC GROUP 2B)     *96-4*
CAS:100-42-5
RTECS #:WL3675000
Fraction by Wt: 35%
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:VOLATILE ORGANIC CONTENT: 386 GM/L
RTECS #:9999999VO

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:YES	 OSHA:NO
Health Hazards Acute and Chronic:EYES: MAY CAUSE IRRITATION. SKIN:
    IRRITATION & DERMATITIS. STYRENE MAY BE ABSORBED IN TOXIC AMOUNTS.
    INHALATION: MUCOUS MEMBRANE IRRITATION & CNS EFFECTS.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:IRRITATION, TEARING, DEFATTING, DRYNESS, UPPER
    RESPIRATROY TRACT DISCOMFORT, HEADACHE, NAUSEA, INSENSIBILITY, GI
    DISTURBANCES, PAIN, DISCOMFORT.
Medical Cond Aggravated by Exposure:CHRONIC RESPIRATORY CONDITIONS,
    ASTHMA, CHRONIC BRONCHITIS, EMPHYSEMA.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR 15 MINS. SKIN: WASH W/SOAP
    & WATER. INHALATION: REMOVE TO FRESH AIR. GIVE CPR/OXYGEN IF
    NEEDED. INGESTION: DON'T INDUCE VOMITING. ASPIRATION HAZARD. OBTAIN
    MEDICAL AT TENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:90F (SUPP)
Lower Limits:1.1
Upper Limits:6.1 (SUPP)
Extinguishing Media:SMALL: CO2, DRY CHEMICAL. LARGE: FOAM, WATER FOG.
Fire Fighting Procedures:WEAR SCBA. COOL CONTAINERS W/WATER.
Unusual Fire/Explosion Hazard:HIGH TEMP EXPOSURE FOR EXTENDED PERIODS
    OF TIME WILL RESULT IN SPONTANEOUS UNCONTROLLED EXOTHERMIC
    POLYMERIZATION.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE IGNITION SOURCES. VENTILATE AREA.
    ABSORB W/AN ABSORBENT MATERIAL, SAWDUST, VERMICULITE/SAND & PLACE
    IN A CLOSED CONTAINER. LARGE: DIKE AREA TO PREVENT MATERIAL FROM
    ENTERING WATER SYSTEMS/SEWER S.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DON'T STORE >100F. AVOID
    PROLONGED/REPEATED SKIN CONTACT. KEEP OUT OF REACH OF CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR APPROPRIATE ORGANIC VAPOR RESPIRATOR BASED
    UPON TYPE & MAGNITUDE OF EXPOSURE IF PELS/TLVS ARE EXCEEDED.
Ventilation:GENERAL: REQUIRED DURING NORMAL USE. LOCAL: MAY BE REQUIRED
    DURING CERTAIN OPERATIONS TO KEEP EXPOSURE LEVELS <TLVS.
Protective Gloves:IMPERVIOUS
Eye Protection:FACE SHIELD/CHEMICAL GOGGLES
Other Protective Equipment:POLYVINYL ALCOHOL & POLYEHTYLENE PROTECTIVE
    GARMENTS, EYE WASH STATIONS & SAFETY SHOWERS
Work Hygienic Practices:WASH W/SOAP & WATER AFTER HANDLING.
Supplemental Safety and Health
BOILING POINT, VAPOR PRESSURE/DENSITY, FLASH POINT & UPPER EXPLOSIVE
    LIMIT INFORMATION IS FOR STYRENE.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:293F (SUPP)
Vapor Pres:5.2 (SUPP)
Vapor Density:3.6 (SUPP)
Spec Gravity:1.1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR, VISCOUS LIQUID W/SHARP STYRENATED ODOR.
Percent Volatiles by Volume:35

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & OXIDIZING AGENTS.
Stability Condition to Avoid:HIGH TEMPS & IGNITION SOURCES.
Hazardous Decomposition Products:BY HEAT: IRRITATING & ACRID FUMES.
Conditions to Avoid Polymerization:HEAT & DIRECT SUNLIGHT.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
    REGULATIONS. UN1866

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.