CUSTOM AEROSOL PACKAGING -- AEROSOL,PAINT -- 8010-00-137-9150
===================== Product Identification ===================== Product ID:AEROSOL,PAINT MSDS Date:08/31/1988 FSC:8010 NIIN:00-137-9150 Status Code:A === Responsible Party === Company Name:CUSTOM AEROSOL PACKAGING Address:128 E WATER ST City:PIQUA State:OH ZIP:45356 Country:US Info Phone Num:513-773-1824 Emergency Phone Num:800-424-9300 Preparer's Name:ERNEST CARTER Chemtrec Ind/Phone:(800)424-9300 CAGE:0G0J3 === Contractor Identification === Company Name:CUSTOM AEROSOL PACKAGING Address:128 E WATER ST Box:City:PIQUA State:OH ZIP:45356 Country:US Phone:513-773-1824 CAGE:0G0J3 ============= Composition/Information on Ingredients ============= Ingred Name:VM&P NAPTHA CAS:8030-30-6 Code:F RTECS #:DE3030000 = Wt:10. OSHA PEL:400 MG/M3;100 PPM ACGIH TLV:1590 MG/M3;400 PPM Ingred Name:XYLENE CAS:1330-20-7 RTECS #:ZE2100000 < Wt:5.1 ACGIH TLV:434 MG/M3;100 PPM ACGIH STEL:651 MG/M3;150 PPM EPA Rpt Qty:1000 LBS DOT Rpt Qty:1000 LBS Ingred Name:SECONDARY BUTYL ALCOHOL OR 2-BUTYL < Wt:5. Ingred Name:AROMATIC HYDROCARBON CAS:64742-95-6 Code:F RTECS #:WF3400000 < Wt:5. Ingred Name:LOW ODOR MINERAL SPIRITS CAS:8032-32-4 Code:F RTECS #:OI6180000 < Wt:5. ACGIH TLV:1370 MG/M3;300 PPM Ingred Name:ACETONE CAS:67-64-1 RTECS #:AL3150000 = Wt:15. OSHA PEL:2400 MG/M3;1000 PPM ACGIH TLV:1780 MG/M3;750 PPM ACGIH STEL:2380 MG/M3;1000 PPM EPA Rpt Qty:5000 LBS DOT Rpt Qty:5000 LBS Ingred Name:METHYL ISO-BUTYL KETONE CAS:108-10-1 RTECS #:SA9275000 < Wt:5. OSHA PEL:410 MG/M3;100 PPM ACGIH TLV:205 MG/M3;50 PPM ACGIH STEL:307 MG/M3;75 PPM EPA Rpt Qty:5000 LBS DOT Rpt Qty:5000 LBS Ingred Name:N-BUTYL ALCOHOL CAS:71-36-3 RTECS #:EO1400000 < Wt:5. OSHA PEL:300 MG/M3;100 PPM ACGIH STEL:C152 MG/M3;C50 PPM EPA Rpt Qty:5000 LBS DOT Rpt Qty:5000 LBS Ingred Name:1,1,1-TRICHLOROETHANE CAS:71-55-6 RTECS #:KJ2975000 = Wt:25. OSHA PEL:1900 MG/M3;350 PPM ACGIH TLV:1910 MG/M3;350 PPM ACGIH STEL:2460 MG/M3;450 PPM EPA Rpt Qty:1000 LBS DOT Rpt Qty:1000 LBS Ozone Depleting Chemical:1 Ingred Name:PROPANE CAS:74-98-6 RTECS #:TX2275000 = Wt:15. OSHA PEL:1800 MG/M3;1000 PPM Ingred Name:ISOBUTANE CAS:75-28-5 RTECS #:TI4300000 = Wt:5. ===================== Hazards Identification ===================== Effects of Overexposure:INGESTION: HARMFUL OR FATAL IF SWALLOWED. EYE CONTACT: PRIMARY IRRITANT. SKIN CONTACT: PRIMARY IRRITANT. INHALATION: HIGH CONCENTRATIONS OF VAPORS ARE ANESTHETIC, WILL IRRITATE THE RESPIRATORY TRACT A ND CAUSE NERVOUS SYSTEM DEPRESSION CHARACTERIZED BY DROWSINESS, LIGHTHEADEDNESS, HEADACHE, DIZZINESS, STAGGERING, CONFUSION, UNCONSCIOUSNESS OR COMA. Medical Cond Aggravated by Exposure:REPORTS HAVE SHOWN THAT REPEATED AND PROLONGED OCCUPATIONAL OVEREXPOSURE TO SOLVENTS MAY CAUSE PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE. ======================= First Aid Measures ======================= First Aid:INGESTION: DO NOT INDUCE VOMITING. CALL PHYSICIAN IMMEDIATELY. EYE CONTACT: FLUSH IMMEDIATELY WITH LARGE AMOUNTS OF WATER FOR 15 MINUTES. CALL PHYSICIAN IMMEDIATELY. SKIN CONTACT: WASH AFFECTED AREA W ITH SOAP AND WATER, REMOVE CONTAMINATED CLOTHING. INHALATION: REMOVE TO FRESH AIR. IF NECESSARY APPLY ARTIFICIAL RESPIRATION AND/OR OXYGEN. CALL PHYSICIAN. ===================== Fire Fighting Measures ===================== Flash Point Method:PMCC Lower Limits:2.3 Extinguishing Media:NFPA CLASS B EXTINGUISHERS. (CARBON DIOXIDE, DRY CHEMICAL OR FOAM). Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE BUT MAY BE USED TO COOL CLOSED CONTAINERS TO PREVENT PRESSURE BUILD UP AND POSSIBLE AUTOIGNITION OR EXPLOSION WHEN EXPOSED TO EXTREME HEAT. IF WATER IS USED. FOG NOLLES ARE PREFERABLE. FIRE FIGHTERS SHOULD WEAR SELF CONTAINED BREATHING APPARATUS. Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED. ISOLATE FROM HEAT, ELECTRICAL EQUIPMENT, SPARKS AND OPEN FLAMES. CLOSED CONTAINERS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT. DO NOT APPLY ON HOT SURFACES. TOXIC GASES M AY FORM WHEN PRODUCT IS CONTACTED BY FLAME OR HOT SURFACES. AEROSOL CONTAINERS HOLD EXTREMELY FLAMMABLE GAS AND FLAMMAB ================== Accidental Release Measures ================== Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION AND PROVIDE MAXIMUM VENTILATION. EQUIP. PERSONNEL WITH PROPER RESPIRATORY, SKIN AND EYE PROTECTION. TAKE UP SPILLED MATERIAL WITH SAWDUST, VERMICULITE OR OTHER ABSORBENT MATERIAL AND PLACE IN CONTAINERS FOR DISPOSAL. ====================== Handling and Storage ====================== Handling and Storage Precautions:DO NOT STORE ABOVE 120 F. KEEP AWAY FROM HEAT, SPARKS, AND OPEN FLAMES. DO NOT PUNCTURE. KEEP OUT OF REACH OF CHILDREN. Other Precautions:USE ONLY AROUND EXPLOSION PROOF EQUIPMENT. AVOID PROLONGED BREATHING OF VAPORS. AVOID CONTACT WITH SKIN. DO NOT TAKE INTERNALLY. INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND INHALING THE CONTE NTS OF THE AEROSOL CAN BE HARMFU ============= Exposure Controls/Personal Protection ============= Respiratory Protection:WERA NIOSH/MSHA APPROVED (TC-23-C) PAINT SPRAY OR (TC-19-C) AIR SUPPLIED RESPIRATOR. Ventilation:PROVIDE GENERAL DILUTION OR LOCAL EXHAUST VENTILATION IN VOLUME AND PATTERN TO KEEP THE CONCENTRATION OF INGREDIENTS LISTED IN SECTION II. Protective Gloves:WEAR PROTECTIVE CLOTHING INCLUDING APRON AND GLOVES. Eye Protection:WEAR CHEMICAL TYPE GOGGLES OR FACE SHIELD. Supplemental Safety and Health ================== Physical/Chemical Properties ================== Boiling Pt:<-17.6C, 0.F Vapor Pres:<78 MMHG Vapor Density:HEAVIER Spec Gravity:.7-.8 VOC Grams/Liter:6.7 Evaporation Rate & Reference:(BU0AC=100): <57 Solubility in Water:21-4% Percent Volatiles by Volume:85-96% ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES AVOID STRONG ALKALIES, STRONG MINERAL ACIDS AND STRONG OXIDIZING AGENTS. Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE WHEN HEATED. ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSE OF ACCORDING TO LOCAL, STATE AND FEDERAL ERGULATIONS. DO NOT INCINERATE CLOSED CONTAINER. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.