DYNATRON/BONDO CORP -- HEAVY WEIGHT BODY FILLER  -- 8010-01-060-7176
<pre>=====================  Product Identification  =====================

Product ID:HEAVY WEIGHT BODY FILLER
MSDS Date:05/21/1988
FSC:8010
NIIN:01-060-7176
Kit Part:Y
=== Responsible Party ===
Company Name:DYNATRON/BONDO CORP
Address:3700 ATLANTA INDUSTRIAL PKWY NW
City:ATLANTA
State:GA
ZIP:30331-1098
Country:US
Info Phone Num:404-696-2730
Emergency Phone Num:404-696-2730
CAGE:16522
=== Contractor Identification ===
Company Name:BONDO/MAR-HYDE CORP
Address:3700 ATLANTA INDUSTRIAL PKWY NW
Box:City:ATLANTA
State:GA
ZIP:30331
Country:US
Phone:404-696-2730
CAGE:16522

=============  Composition/Information on Ingredients  =============

Ingred Name:TALC (CONTAINING NO ASBESTOS)
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: >50%
Other REC Limits:N/K 
OSHA PEL:2 MG/M3 RDUST
ACGIH TLV:2 MG/M3 RDUST; 9192

Ingred Name:STYRENE, MONOMER  (SARA III)
CAS:100-42-5
RTECS #:WL3675000
Fraction by Wt: <20%
Other REC Limits:N/K 
OSHA PEL:100 PPM
ACGIH TLV:S,50PPM/100STEL;9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:UNSATURATED POLYESTER RESIN
CAS:26123-45-5
Fraction by Wt: <50%
Other REC Limits:N/K 
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:N/K 
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:YES	 OSHA:NO
Health Hazards Acute and Chronic:REPEATED SKIN CONTACT WITH PROLONGED
    EXPOSURE POSSIBLY DEVELOPING INTO DERMATITIS.IF ECZEMA
    DEVELOPS,THIS MOST OFTEN OCCURS ON THE BACK OF HANDS,WRISTS AND
    FOREARMS.
Explanation of Carcinogenicity:STYRENE MONOMER:INADEQUATE EVIDENCE FOR
    CARCINOGENICITY IN HUMANS AND LIMITED EVIDENCE IN ANIMALS (IARC
    1987).
Effects of Overexposure:EYES:IRRITATION.SKIN:MINOR IRRITATION.REPEATED
    CONTACT MAY CAUSE RASH.INGESTION:N/K .INHALATION:UPPER RESPIRATORY
    IRRITATION.CHRONIC:MAY FEEL DRUGGED,BECOME SLEEPY OR UNCONSCIOUS.
Medical Cond Aggravated by Exposure:INDIVIDUALS WITH CHRONIC
    RESPIRATORY CONDITIONS:ASTHMA,CHRONIC BRONCHITIS,EMPHYSEMA,ETC.MAY
    BE ADVERSELLY AFFECTED BY ANY FUME OR AIRBORNE PARTICULATE MATTER
    EXPOSURE.

=======================  First Aid Measures  =======================

First Aid:EYES:FLUSH WITH LOTS OF WATER FOR AT LEAST 15 MINUTES,LIFTING
    LIDS OCCASIONALLY.GET MEDICAL AID.SKIN:REMOVE CONTAMINATED
    CLOTHING.WASH THOROUGHLY WITH SOAP & WATER.IF IRRIT OCCURS,GET
    MEDICAL AID.INGE STION:DO NOT INDUCE VOMIT.GET MEDICAL
    AID.INHALATION:REMOVE FROM EXPOSURE.IF BREATH IS STOPPED OR
    DIFFICULT,ADMINISTER ARTIFICIAL RESPIRATION OR OXYGEN AS
    INDICATED.IF SYMPTOMS PERSIST,CONSULT MD.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:90C (STYRENE)
Lower Limits:6.1
Upper Limits:1.1
Extinguishing Media:SMALL FIRES:CARBON DIOXIDE,DRY CHEMICAL;LARGE
    FIRES:FOAM AND WATER FOG.
Fire Fighting Procedures:DENSE SMOKE LIMITS VISIBILITY.VENT SMOKE & USE
    GAS MASK OR REMOTE AIR SUPPLY.WEAR MSHA/NIOSH APPROVED
    SELF-CONTAINED BREATHING APPARATUS & PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:ISOLATE FROM HEAT,ELECTRICAL
    EQUIPMENT,SPARKS & OPEN FLAME.HAZARDOUS DECOMPOSITION
    PRODUCTS:CO,CO*2,LOW MOLECULAR WEIGHT HYDROCARBONS & ORGANIC ACIDS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL IGNITION SOURCES.INCREASE
    VENTILATION TO DISPERSE VAPOR.DIKE LARGE SPILLS TO PREVENT RUNOFF
    INTO SEWERS/WATERWAYS.REMOVE MATERIAL BY
    SHOVELING,WIPING,ETC.SWEEP/CLEAN WITH INERT MATERIALS (S
    AND,VERMICULITE,ETC) & PLACE IN CLOSED CONTAINER.
Neutralizing Agent:N/K 

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID PROLONGED/REPEATED SKIN
    CONTACT.AVOID EYE CONTACT.STORE IN COOL,DRY AREA OUT OF DIRECT
    SUNLIGHT.USE ADEQUATE VENTILATION.
Other Precautions:BOND & GROUND CONTAINERS FOR TRANSFER TO PREVENT
    STATIC SPARKS.STYRENE VAPORS ARE UNINHIBITED & MAY CAUSE BLOCKAGE
    OF VENTS DUE TO POLYMERIZATION (PREVENT WITH PERIODIC
    INSPECTION).AVOID IMPROPER ADDI TION OF PROMOTERS & OXIDIZING
    AGENTS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE ADEQUATE VENTILATION.NIOSH/MSHA APPROVED
    ORGANIC VAPOR/DUST RESPIRATOR TO AVOID INHALATION OF EXCESSIVE AIR
    CONTAMINANTS.
Ventilation:USE LOCAL EXHAUST TO CONTROL EMISSION.GENERAL DILUTION
    VENTILATION MAY HELP REDUCE AIR CONTAMINANT CONCENTRATION.
Protective Gloves:POLYVINYL ALCOHOL & POLYETHYLENE
Eye Protection:SAFETY GLASSES RECOMMENDED.
Other Protective Equipment:SAFETY SHOWERS AND EYE WASH STATIONS SHOULD
    BE AVAILABLE.
Work Hygienic Practices:CLEAN HANDS WITH SOAP AND WATER AFTER EVERY
    USAGE.
Supplemental Safety and Health
% VOLAT BY WEIGHT:<20.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:N/K 
Melt/Freeze Pt:M.P/F.P Text:N/K 
Decomp Temp:Decomp Text:N/K 
Vapor Pres:N/K 
Vapor Density:N/K 
Spec Gravity:1.78 (WATER=1)
Evaporation Rate &amp; Reference:<1 (ETHER=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE PASTE,STYRENE ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS,PEROXIDES AND OTHER OXIDIZING AGENTS.
Stability Condition to Avoid:N/K 
Hazardous Decomposition Products:CARBON MONOXIDE,CARBON DIOXIDE,LOW
    MOLECULAR WEIGHT HYDROCARBONS,ORGANIC ACIDS.
Conditions to Avoid Polymerization:UNREGULATED CONTACT WITH ORGANIC
    PEROXIDES,EXPOSURE TO HEAT,OPEN FLAME AND PROLONGED STORAGE ABOVE
    100F,38C.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
    FEDERAL,STATE AND LOCAL REGULATIONS.COORDINATION WITH SUPPORTING
    INSTALLATION AND/OR MACOM ENVIRONMENTAL COORDINATION PRIOR TO
    DISPOSAL IS RECOMMENDED TO DETERMINE  APPROPRIATE DISPOSAL METHODS
    .

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.